Vibro-meter 200-582-300-013 RPS6U 48VDC

Description

Vibro-meter 200-582-300-013 RPS6U 48VDC
SPECIFICATIONS – COMMON TO ALL MPC4 CARDS
Dynamic signal inputs
Number of inputs : 4 per MPC4 card
DC range : 0 to +20 V or 0 to −20 V
AC range : ±10 V max.
Common mode voltage range : −50 to +50 V
CMRR : >60 dB at 50 Hz
Crosstalk : −72 dB
Input impedance : 200 kΩ
Current input range
• DC signals : 0 to 25 mA
• AC signals : ±8 mA max.
Analog frequency range : DC to 60 kHz (−3 dB).
Note: Applicable when dynamic signal outputs are shared using
the Raw bus (VM600 rack). Dynamic signal outputs can be shared
with XMx16/XIO16T card pairs but cannot be shared with other
MPC4/IOC4T card pairs.

Analog AC frequency range
• Without integration : 0.1 Hz to 10 kHz
• With integration : 2.5 Hz to 10 kHz
Current measuring resistor : 324.5 Ω
Buffered dynamic signal outputs
The buffered “raw” dynamic signal outputs are available on the front-panel BNC connectors (MPC4 card) and
the screw-terminal connectors (IOC4T card).
Output impedance : 50 Ω
Analog frequency range : DC to 10 kHz (−0.1 dB with a load >1 MΩ).
DC to 10 kHz (−0.2 dB with a load >200 kΩ).
DC to 40 kHz (−3 dB).
Note: Applicable when buffered “raw” dynamic signal outputs are
shared using the front-panel BNC connectors (VM600 MPC4 card)
and the screw-terminal connectors (VM600 IOC4T card).
Phase error : <5° (DC to 1 kHz). <30° (DC to 10 kHz). Transfer ratio • Voltage input : 1 V/V • Current input : 0.3245 V/mA