Vibro-meter 200-582-xxx-HHh RPS6U

Description

Vibro-meter 200-582-xxx-HHh RPS6UWhen a VM600 is part of a safety related system (SRS), certain configuration restrictions
must be applied. In particular:
• The output relays must be configured as de-energized to trip. Specifically:
• the relay is energized when the monitored levels are within their specified tolerances
• the relay is de-energized to indicate an alarm.
• The use of the VM function danger bypass is not allowed.
• The use of the VM function trip multiply is not allowed.
• The alarm must be defined as ‘latching’.
Valid Safety Configurations
The VM600 machinery protection system (MPS) can be configured in many different
arrangements. These configurations are described in more detail in the hardware manual
(see 1.5 – Applicable Documents). For example, the VM600 can be used to protect rotating
machines in a safety related system.Vibro-meter 200-582-xxx-HHh RPS6U

The different versions of ABE04x system rack
enable different mounting options to support
various markets and applications.
The VM600 system rack has an integrated VME
backplane which provides the electrical
interconnections between the installed
VM600Mk2/VM600 modules (cards): power supply,
signal processing, input /output, relay and
CPUx “rack controller”. It also includes a power
supply check relay, available at the rear of the
rack, which is used to indicate that the installed
RPS6U rack power supplies are operating
normally.
Either one or two RPS6U rack power supplies can
be installed in a VM600Mk2/VM600 ABE04x system
rack. A rack with one RPS6U power supply (330 W
version) supports the power requirements for a full
rack of modules (cards) in applications with
operating temperatures up to 50°C (122°F).
Alternatively, a rack can have two RPS6U power
supplies installed in order to either support rack
power supply redundancy or in order to supply
power to the modules (cards) non-redundantly