PROSOFT PTQ-PDPMV1

Description

PROSOFT PTQ-PDPMV1
The PROFIBUS DPV1 Master module is a powerful communication interface for Quantum
processors. Developed under license from , the module incorporates proprietary
backplane technology that enables powerful data exchange with processors.
The module supports complete Master specifications according to IEC 61158. Acyclic
parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing
processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1
protocol.
The module acts as an input/output module between the PROFIBUS network and the
processor. Data transfer from the processor is asynchronous with the I/O data transfer on
the PROFIBUS network.

Features Benefits
Easy to configure and manage ♦ Includes ProSoft Configuration Builder software to design, configure and monitor your
PROFIBUS network
♦ Includes PROFIBUS DPV1 Master FDT (Field Device Tool) communication DTM
(PROFIBUS comDTM) software to interface between any compliant FDT software container,
an FDT device DTM, and applicable PROFIBUS slave devices
♦ Configure PTQ module and PROFIBUS network over Ethernet
Industry Recognition ♦ Schneider Electric CAPP (Collaborative Automation Partner Program) Approved
♦ PROFIBUS Trade Organization (PTO) Approved
Rugged and reliable ♦ The module is built on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor
♦ The firmware is flash-upgradable
♦ Adheres to the Unity HEC Hot Standby Functional Specifications.
♦ Supports up to six PTQ-PDPMV1 modules per rack (up to four for Hot Standby
implementations)
♦ Supports extended diagnostic data, alarm indications and confirmations handling, Multicast
and Broadcast telegrams (DPV1)

General Specifications
• Single slot – Quantum backplane compatible
• The module is recognized as an Options module and has access to PLC memory
for data transfer
• Configuration data is stored in non-volatile memory in the ProTalk®
module
• Configuration software for Microsoft Windows XP, 2000 and NT is included with the
module
• Up to six modules can be placed in a rack
• Local rack – The module must be placed in the same rack as the processor
• Compatible with all common Quantum programming packages, including Concept
(version 2.6 or higher), Unity Pro (version 2.2 or higher), ProWORX (version 2.20 or
later) (HSBY only available with Unity Pro environment)
• Quantum data types supported: 3x, 4x
• High speed data transfer across the backplane provides quick data update times
• Sample ladder file available
Functional Specifications
• Easy-to-use drag and drop Busview configuration interface via ProSoft
Configuration Builder software (see PSW-PCB Datasheet)
• Monitoring and modification of process data and DPV1 acyclic data with online
slave diagnostics
• Supports PROFIBUS PA slaves on the network through DP/PA coupler or link
• Supports up to 125 slave devices with repeaters
• Supports extended diagnostic data (DPV1)
• Supports all standardized baud rates, up to 12 Mbits/s
• Auto baud detection at all valid PROFIBUS DPV1 rates
• Supports PROFIdrive 3.1 compliant parameter read and write operations
• Supports Sync and Freeze commands
• Alarm indications and confirmations handling (DPV1)
• Supports Multicast and Broadcast telegrams (DPV1)
• CRC checksum determination of slave configuration consistency to processor
• FDT/DTM PROFIBUS Master transport communication DTM software included
(Product Number PSW-CDTM-PDPM)
Hot Standby
• Hot Standby features support the SE 140 671 CPU
• Supports up to six PTQ-PDPMV1 Hot Standby modules per rack
• Diagnostic and status words are provided for Active Primary and Passive
Secondary Master health status
• PROFIBUS switchover time will be nominal 100 ms not to exceed 300 milliseconds
• Cable break detection with segmented network slave quantity information
• PROFIBUS health messages are generated from secondary Master via FDL ping
services
• No setup parameters required. Module automatically detects Hot Standby system
Physical
• PROFIBUS DPV1 RS-485 interface with a 9-pin D shell female connector and
isolated Opto-Couplers
• Master Status LED Indicators f