AVR10D-Q22020 Bus module

Description

These Bus Converters connect CENTUM VP Human
Interface Stations (HISes) on the Vnet/IP to CENTUM
VP/CENTUM CS 3000/CENTUM CS stations on the V
net, CENTUM CS 1000 stations on the VL net in other
domain.
To connect to CENTUM CS 3000/CENTUM CS
System, LHS4450 Multiple Project Connection
Package and LHS5450 Multiple Project Connection
Builder are required. To connect to CENTUM CS
1000 System, an Ethernet, as well as these packages,
is also required.
 HARDWARE SPECIFICATIONS
For the installation specifications and environmental
conditions that are common to the systems, refer to
“Integrated Production Control System CENTUM VP
System Overview (Vnet/IP Edition) (GS 33K01A10-
50E).”
Communication on the Vnet/IP Side
Communication Speed: 100 Mbps, Full Duplex
Connection: UTP cable (CAT5e or better),
RJ45 connector
Interface: 100Base-TX compliance
Max. distance: 100 m (Distance between AVR10D
and Layer 2 switch)
Communication on the V net Side
Communication Speed: 10 Mbps
Connection: Coaxial cable, BNC type
Dual-redundant or single
For CENTUM VP, CENTUM CS 3000 and CENTUM
CS
Communication on the VL net Side
Communication Speed: 10 Mbps
Connection: Coaxial cable, BNC type
Dual-redundant or single
For CENTUM CS 1000
Configuration
Nest
Mounting
19-inch Rack Mounting:
Rack mount (4 x M5 screws)
Insulation bush (accessory)
Connection
Power Supply: M4 screw terminal connection
Grounding: M4 screw terminal connection
Contact Output: M4 screw terminal connection
V net and VL net Side: T-junction BNC connection
Vnet/IP Side: UTP cable (CAT5e or better)

AVR10D-Q22020